Ceramic tile installation is not at all an easy job. Be it in your kitchen or on your bathroom, it needs the perfect measurements and the skills to be able to install the tiles in a correct manner and not make the wall or the floor of your hose look ugly. The ceramic tile installation tips here will be able to guide you a lot and ease out the common mistakes and the headaches that are done by everyone while the installation of tile is done. Let’s take a look below:
1. Make A Smooth Mix: First and the foremost thing that you must do is to mix the thin set or the grout into a smooth and a fine paste. Let it stand for around 10 – 15 minutes before you proceed with the mixture. The mixture needs to be completely free of any air bubbles if you want to make it smooth and gripping. The ceramic tile installation procedure will then be robust and under no circumstances will the tiles fall off or become loose. This is why making a smooth mix is essential prior to installing the tile.
2. Make Sure The Floor Is Flat: A tilted floor can make the tile installation work difficult. So even if your floor is tilted make sure you level it up before you proceed as it can be challenging to set the tiles if the floor remains in a tilted manner. You will end up with tiles that have gaps in between, and the cement will also run down on the tilted part. So even before you think of installing tiles on the tiled floor, bring it to a particular level and then proceed with the ceramic tile installation work.
3. Use Straight Ledgers: Are you confused about whether or not you are installing the tiles in a consecutive manner? Well, this is a common confusion that you are likely to get if you are installing the tiles for the first time. So to ensure that the tiles are straight and in line you can use a straight ledger. The straight ledger will act as a reference for you to set the tiles in a straight line. Once one line of tiles has been set in a straight way, the rest will automatically fall in place without any difficulty.
4. Clean Up After Installation: After you are done with the ceramic tile installation, you will notice that the cement will peek out from the gaps in between the tiles. The thing that you need to do now is to clean up these gaps so that everything looks really clean, fresh and smooth. One of the ways to clean up this mess is to use a very sharp knife and to remove all the extra bits and pieces that might be present in between the tiles. This will ensure that you get an elegant finish and the walls look amazing.
So now that you know the significant tips while you are installing the tiles, it will be really easy to do it on your own. However a professional will always do it in a better way than you ever can. So make sure you hire the professionals who will charge you a bare minimum and do the job for you in half the time that you will do in your own. So get the ceramic tile installation professional today and make sure your house glows with beautiful, good-looking and brand new tiles that you have chosen to give your house a new face.